Pitney Bowes DM925 - Manual (Page 159)

DM925™ Digital Mailing System Operating Guide
SV62207 Rev. B 9 - 5
5. Place the brush in the
case, two or three teeth
away from the bottom.
The shorter bristles
should be against the
solid side of the holder.
6. Return the case to the
brush mechanism and
close the side door
7. Return tape lever to the
required position.
• Wet Tape–Lever up
• Dry Tape– Lever down
Replacing the
Moistener Brush Follow steps 1 through 7 of Cleaning the Moistener Brush, but DO NOT
perform step 4.
Printer
Maintenance The printer components, consisting of the printer nozzle, ink cartridge and
printhead, require minimum maintenance to ensure clean, clear meter
imprints on your mail.
If the print quality deteriorates and you cannot improve it with the proce-
dures in this chapter, contact the Pitney Bowes Help Desk. Refer to the 
Pitney Bowes Contact Information List
at the front of this guide for the
phone number.
Two to three teeth away from bottom
Short Bristles