Altera SDC and TimeQuest API - Manual (Page 149)

Chapter 2: SDC and TimeQuest API Package and Commands 2–139
sta
© December 2009 Altera Corporation SDC and TimeQuest API Reference Manual
report_partitions
Usage
report_partitions [-nworst <number>] [-panel_name <name>] [-stdout]
Options
-nworst <number>: Specifies the maximum number of paths to report between partitions.
If unspecified, the limit defaults to 1000
-panel_name <name>: Sends the results to the panel and specifies the name of the new
panel
-stdout: Output the result onto stdout
Description
Reports timing information related to design partitions.
The report_partitions command analyzes the worst 1000 setup paths in the design by default, but you can
optionally set the nworst option to increase or decrase this number.
This function reports the total number of failing paths for each partition and the worst-case slack for any
path involving the partition in a Partition Timing Overview table.
The function also creates a Partition Timing Details table that lists the number of failing paths and
worst-case slack from each partition to the others, which provides a more detailed breakdown of where
the critical paths in the design are with respect to design partitions.
Reports can be directed to the Tcl console (-stdout, by default) or the TimeQuest graphical interface
(-panel_name <name>)or both.
Example
project_open my_project
create_timing_netlist
read_sdc
update_timing_netlist
# Report a maximum of 500 failing paths between partitions to the
# TimeQuest graphical interface and to the Tcl console.
report_partitions -panel_name "Partition Timing Report" -nworst 500 \
-stdout