Altera SDC and TimeQuest API - Manual (Page 162)

2–152 Chapter 2: SDC and TimeQuest API Package and Commands
sta
SDC and TimeQuest API Reference Manual © December 2009 Altera Corporation
report_ucp
Usage
report_ucp [-append] [-file <name>] [-panel_name <name>] [-stdout] [-summary]
Options
-append: If output is sent to a file, this option appends the result to that file.
Otherwise, the file will be overwritten
-file <name>: Sends the results to an ASCII or HTML file. Depending on the extension
-panel_name <name>: Sends the results to the panel and specifies the name of the new
panel
-stdout: Send output to stdout, via messages. You only need to use this option if you
have selected another output format, such as a file, and would also like to receive
messages.
-summary: Generate only the summary panel.
Description
Reports unconstrained paths.
Example
project_open chiptrip
create_timing_netlist
read_sdc
update_timing_netlist
report_ucp
delete_timing_netlist
project_close