Altera Stratix II GX EP2SGX90 Transceiver Signal Integrity Development Board - Manual (Page 11)

Altera Corporation Reference Manual 2–1
May 2006 Preliminary
2. Board Components &
Interfaces
Board Overview This chapter provides operational and connectivity detail for the board’s
major components and interfaces and is divided into the following major
blocks:
■ Featured device
■ Clocking circuitry
■ Interfaces
● SMA connectors for high-speed I/O
● USB interface
● General user interfaces
■ Power supply
■ Thermal management
■ FPGA configuration
■ Flash memory
1 Board schematics, the physical layout database, and
manufacturing files for the Stratix
® II GX EP2SGX90 transceiver
signal integrity development board are included in the
Transceiver SI Development Kit, Stratix II GX Edition in the
following directory:
<install path>\SIIGX_SI_Kit-v1.0.0\Docs\BoardDesignFiles
f
For information on powering-up the Stratix II GX transceiver signal
integrity development board and installing the demo software, refer to
the Transceiver SI Development Kit, Stratix II GX Edition Getting Started
User Guide.