7 profibus communications card – CIRCUTOR CVMk2 Series User Manual
Page 110
Advertising
110
CVM
k2
DISPLA
Y
6.4.7 PROFIBUS COMMUNICATIONS CARD
If a position is selected in which a profibus communications card is inserted, the following
messages will be displayed in the screen.
periph. nim
0
Bus status
aCTIVe
/
INACTIVe.
The peripheral number is
0
, but when the communications starts this value changes to the
slave number configured by the user (See chapter 4.7.7.3).
The status bus shows if the bus is working or not.
Advertising