CIRCUTOR CVMk2 Series - Manual (Page 117)

117
CVM k2
QUALITY
The graphics screen menu has the following options.
z vx1: This button can be pressed to vertically zoom in on the graphic displayed.
This is a cyclic zoom with x1, x2, x4 and x10 options, which then returns to normal.
Hold : This keeps the screen from refreshing. Pressing this button will change the bottom of
the screen. Specifically, the Run button (F3).
The Run button permits returning to the continuous graphical display.
Data : Pressing data will return the user to the screen that displays the numerical values for
real time harmonic decomposition. (See Section 7.1.4.)
To select total, odd or even harmonics on the graphical interface, use the up/down arrow
buttons to navigate between the three options on the right side of the screen.
The bottom menu on the graphical display is the same for all three options. The menu can only
be changed by returning to the screen of numerical values and pressing
data .
If the user desires to view the values for the harmonics of another phase in graphical form,
should navigate to the numerical values screen, change to the preferred phase using the
Next
button and access the graphical interface by pressing Grap .