CIRCUTOR CVMk2 Series - Manual (Page 85)

85
CVM k2
DISPLA
Y
Maximums : (F2) This displays the maximum parameters stored in the system memory since
the last time the maximum values were reset or since the system was put into
operation. (See Section 6.1.1.2. Maximums)
Minimums : (F3) This displays the minimum parameters stored in the system memory since
the last time the minimum values were reset or since the system was put into
operation. (See Section 6.1.1.3. Minimums)
TEXT VALUE DESCRIPTION
Display Version D- CVMk2-xxx Firmware version stored in the display screen.
S/N Display ************** Display screen serial number.
Language Spanish Language selected.
Measurement modules 01 Number of modules detected by the display screen.
Block NO Display screen is or is not password protected.
LDC OFF NO Display screen turns off with the lighting.
Light for ON Selected time over which backlighting will be on.
Date **/**/** Date configured in the module.
Time **:**:** Time configured in the module.
Temperature **.* Measurement module's internal temperature.
Days since reset *.** Days since the last reset was performed.
Days in operation *.** Total days the system has been in operation.
The following information appears on the screen:
It is important to refer to this screen, because it provides a summary of the display screen
configuration. Accordingly, it is not necessary to navigate through the configuration menus to
verify the system's configuration.