CIRCUTOR CVMk2 Series - Manual (Page 27)

27
CVM k2
OPERA
TION
3.1.1.f. Module name
The measuring module currently being viewed is defined on this part of the display screen. This
is important in facilities where measuring modules are communicating with one single display
screen.
3.1.1.e. Icons
Editable configuration menu (without password).
Configuration menu locked with password.
None of the voltages for the phases are connected, or they are not detected.
Voltage is only detected at the phase 1 input.
Voltage is only detected at the phase 2 input.
Voltage is only detected at the phase 3 input.
Voltage is only detected at the phase 1 and 2 inputs.
Voltage is only detected at the phase 1 and 3 inputs.
Voltage is only detected at the phase 2 and 3 inputs.
Voltage is detected at the phase 1, 2 and 3 inputs.
Correct μSD memory status.
Incorrect μSD memory status.
Extraction of μSD card enabled.
Short circuit or hole detected. This only appears during the event.
Overvoltage detected. This only appears during the event.
Switching detected. This only appears during the event.
There is no consumption and no generation.
Generation
Consumption.