CIRCUTOR CVM144 Series - Manual (Page 35)

----- Supply network analyzer CVM-144 ------ User's manual --- Page No. 34
b.2.- Programming the minimum value to be controlled:
OUT 1 RELAY 1
AL LO
0.000
Minimum value
b.3.- Programming the delay:
OUT 1 RELAY 1
SEC Delay in seconds
0.000
maximum 9999 s
- Press " " to pass to the next option: the set-up for the second relay is
then shown:
OUT 2 RELAY 2
CODE
00
Parameter No. (1)
Proceed as before. Pressing again " " the set-up option exited.
---------------------------------------------------------------------------