Top Global MB6800 User Manual
Page 28
Top Global USA. ----MB6800 User Guide
- 28 -
Function Summary
The WAN interface of MB6800 is used to connect Internet and
wireless WAN. This
configuration page is used to set some basic parameters of the wireless WAN card.
Detailed Configurations
If Enable this Interface is not checked, no other parameters in this page are available.
NAT: The client devices will NOT be able to access the Internet through this interface
once the “NAT” option on it is set to Disabled.
Connect mode: Indicate which wireless WAN connection policy is used.
Auto:
This option enable MB6800 to automatically make the internet connection
each time when it powers on. It keeps MB6800 always connected to the
Internet, even when the connection is idle. To select this option, click the radio
button next to Keep Alive. The default Redial Period is 30 seconds (In other
words, the Device will check the Internet connection every 30 seconds).
Dial-On-Demand:
When Connect mode is set to Dial-On-Demand, MB6800 will
disable Keepalive automatically.