Top Global MB6800 - Manual (Page 69)

Top Global USA. ----MB6800 User Guide
- 69 -
4 Troubleshooting
4.1 Overview
 Introduction
 Reset to Factory Default procedure
 Force Reload Procedure
 Firmware Upgrade Procedure through Web
 Common Problems and solutions
 Frequently Asked Questions
 LED Indication status
4.2 Introduction
This section helps you to locate problems related to MB6800 setup. The most common
installation problems are related to the IP address. For example, without the TFTP server
IP address, you will not be able to download firmware to MB6800.
IP address management is critical and we suggest you to create a chart to document and
validate the IP addresses of your system.
If the password is lost or forgotten, you will need to reset the MB6800 to default values.
The Reset to Factory Default procedure resets the MB6800 configuration settings, but
does not change the current firmware. The Forced Reload procedure will erase the
current firmware and configurations, please use it with caution when you need to
download new software.
Reset to Factory Default Procedure
Use this procedure to reset the network configuration values, including the MB6800 IP
Address, Subnet Mask, and so on. The current MB6800 Software will not be erased. This