Top Global MB6800 - Manual (Page 66)

Top Global USA. ----MB6800 User Guide
- 66 -
 Detailed information:
WAN Interface#0: This block shows the information of Wireless WAN data card inserted
in MB6800. The Status field shows whether the wireless WAN card has dialed up to the
Internet. Or if no data card exists, it will inform “No data card was found.”. When a data
card is inserted and the “Connect Mode” on the “Internet Access” page is set to
“Manual”, the information about this interface will be displayed as below:
Figure 3- 64
The status field shows the current status of the cellular wireless WAN card. Users can
click the button Connect/Disconnect to do dial up and hang off.
The Up Time field shows how long in second that this interface has been connected to the
Internet since last dialing up.
The IP Address field and the Network Mask field shows the IP address and the subnet
mask that the interface obtained from the PPP dialing negotiation.
The “In/out packets” field shows how many packets have been passed through this
interface since the last dialing up.
WAN interface#1: This block shows the information on the interface of the serial modem.
The meaning for each field is same as the former ones.
LAN interface: This block shows the information on the LAN interface.
3.4.8 Diagnostics
There are two main categories in this setting:
 System logs
 DHCP leases