Top Global MB6800 - Manual (Page 46)

Top Global USA. ----MB6800 User Guide
- 46 -
3.4.3.2 DHCP service
Figure 3- 44 DHCP service
You can configure the parameters for the DHCP service on this page. You can enable or
disable the DHCP service on the router by check or uncheck the box of “Enable DHCP
service ”. The range of the IP address for the DHCP service to distribute can be defined in
the “Range” field. These IP addresses should be in the same subnet with the route‟s LAN
IP address. The “Lease time” field specifies the lease time for each dynamic IP address
assignment, with default 86400, in second.
MB6800 also supports the permanent IP address assignment to a pre-defined client. Click
to add a permanent IP address assignment rule, and click to edit, and click to
delete an entry.
Figure 3- 45 Permanent IP address assignment
If the box of “Deny unknown clients” is checked, Any client devices holds the MAC
address other than this list will not be able to obtain IP address from the router by DHCP.