Top Global MB6800 - Manual (Page 8)

Top Global USA. ----MB6800 User Guide
- 8 -
2.4 LED Indicators
MB6800 has five two-color LEDs to indicate the working status. The following table shows
the status when the MB6800 is configured successfully and running properly.
Table 2-1 Normal LED Indications
Power WLAN WWAN Ethernet
LAN Ethernet
WAN
Off Power off Disabled Card inserted;
No Internet
connection
No cable No cable
Green Power on and
normal
Enabled Card inserted;
Internet
connected
100Mbps mode 100Mbps mode
Green
Blink
N/A Enabled and
data
transmission
Card inserted;
Internet
connecting
100Mbps
mode, and data
transmission
100Mbps mode,
and data
transmission
Red N/A N/A No card 10Mbps mode 10Mbps mode
Red
Blink
N/A N/A N/A 10Mbps mode,
and data
transmission
10Mbps mode,
and data
transmission
Amber System error N/A N/A N/A N/A
Amber
Blink
System booting
or upgrading
firmware
Enabled and
data
transmission
error
N/A N/A N/A
2.5 Initialize the MB6800 Unit
1. Connect MB6800 with your computer, there are two ways to connect MB6800 with
your computer:
I. Connect your computer to MB6800 using the attached Ethernet cable and
your computer is set to be “Obtain an IP address automatically”.
II. Alternatively, you can connect your computer to MB6800 with wireless LAN.