Adept Lynx Platform - Manual (Page 48)

Adept Lynx Platform User's Guide, Rev B
Page 48 of 116
Chapter 5: Connectivity
Digital Ant1 Ant2
Audio In Audio Out
Audio Out
Figure 5-1. Right Side of the Core
Lynx Core Front, Upper
CAN Bus B Digital I/O Analog I/O
User LAN RS232-1 RS232-2 Aux Sensors
Figure 5-2. Front Upper Core
Connection Type Description
Ethernet RJ45,
Shielded General (USER LAN), Auto-MDIX.
RS-232 (Aux Sensors) HDB15M Optional vertical lasers
RS-232 x 2 DB9M Port 1 and Port 2, general use
CAN Bus B DB9F Consult Adept for use.
Digital I/O (HDB44F) HDB44F 16 digital inputs, in 4 banks of 4. Each bank
can be wired as active high or active low
depending on the connection of the BANK# ter-
minal.
V
IN
range for each input is 0 to 30 V. The input
is ON when V
IN
> 4 V, OFF when V
IN
< 1.3 V.
16 digital outputs, protected low-side (open-
drain) drivers. 500 mA output each. May be
used with loads connected to VBAT, AUX_20V,
_12V, or _5V. You must stay within the
allowed current capacity of the VBAT or AUX
power supplies.
Analog I/O HDB15M General use