Argox F1 - Manual (Page 40)

40
Loading Media
The F-Series printer offers three different loading modes: standard, peel-off, or
with a cutter.
 Standard mode allows you to collect each label freely.
 Cutting mode automatically cuts the label after it prints.
 Peel-off mode peels backing material away from the label as it prints.
After the label is removed, the next label prints.
Standard Mode
1. Lift the top cover and front access door to expose the media compartment.
2. According to media core inner size and load the media roll onto the media
hanger. (Figure 10-1 and 10-2)
Figure 10-1 (1inch media core inner) Figure 10-2 (3inch media core inner)
3. Click the media hanger back into the media compartment. (Figure 10-3)
Figure 10
Media Hanger