Argox F1 - Manual (Page 61)

61
IGNORE COMMAND Set panel commands to be active or ignored.
In default, all commands are active.
SELECT ALL
DARKNESS
SPEED
RIBBON DETECT
MEDIA TYPE
PRINT MODE
PRINT WIDTH
SERIAL COMM.
RTC SETUP
Special Setup
LANGUAGE The LANGUAGE parameter is included in
the special menu. You can select a language
via the control panel.
1. Press <MENU> for 5 seconds.
2. Press the <
↑> or <↓> button to reach the
language of your choice.
3. Press <MENU> and you are prompted
to accept changes.
Press <ENTER> to confirm the language.
ENGLISH
FRENCH
GERMAN
ITALIAN
SPANISH
PORTUGUESE
CHANGE PASSWORD The parameter allows you to change the
password for Authorised 1 and Authorised 2.
1. Press <MEN
2. .U> for 5 seconds.
3. Press <ENTER> and the printer prompts