Argox F1 - Manual (Page 58)

58
2. Press <ENTER> and use the up <↑>
and down <↓> buttons to scroll through
selections.
3. Press <ENTER> again and a warning
message “Are you sure” appears. You
can select “YES” to continue or “NO” to
cancel this operation.
 FORM
Delete form.
GRAPHIC Delete graphic.
FONT Delete font.
AUTO FORM Auto form lets you detach the printer from a
computer and print in standalone mode.
OFF Enable automatic form printing.
ON Disable automatic form printing.
REPRINT MODE Reprint a label partially printed due to ribbon
out, media out or head open error conditions.
The label is reprinted after error condition is
corrected.
On
Enable recovery print.
Off Disable recovery print.
LABEL COUNT The printer displays label quantity you print.
On Enables the label count.
Off Disables the label count.
LABEL COUNT TYPE Count printing label quantity as decreasing or
increasing.
Decreasing Count printing label as decreasing.
Increasing Count printing label as increasing.
ALERT BUZZER Audible signal indicates error condition.
ON Enables the buzzer.
OFF Disables the buzzer.