Argox F1 - Manual (Page 51)

51
Adjust Print Head Pressure
If printing quality is not even, you may need to adjust the print head pressure.
To adjust print head pressure use a flat tip screwdriver to turn the left and right
screws counterclockwise to increase the pressure, or clockwise to decrease
the pressure. (Figure 26)
Figure 26
Adjust the pressure adjustment screws as follows:
Condition Resolution
Print quality of the left side of a label
is too light.
Turn the left screw counterclockwise to
increase the pressure.
Print quality of the right side of a
label is too light.
Turn the right screw counterclockwise
to increase pressure.
Right Screw
Left Screw