Figure 23 – room 1: sbm1400 adapter installation – ARRIS SBM1000 User Guide User Manual

Page 35

Advertising
background image

Installing the MoCA Adapters

SBM1000 SMART Video Adapter Kit • User Guide

27

590631-001-a

Figure 23 – Room 1: SBM1400 Adapter Installation

7. Connect one of the power adapters (included) to the Power port on the SBM1400 and plug it

into the electrical wall outlet.

To install the SBM1100 (see Room 3 in Figure 22):
8. If needed, install the SBM1100 to support a second Smart TV installation in your home (see

Room 3 in Figure 22).
Note:

Installations that have integrated MoCA gateways do not require a second SBM1000

adapter (see Room 2 in Figure 22). The second SBM1000 adapter can be used to enable a
second room on the MoCA network (see Room 3 in Figure 22).

9. Disconnect the coaxial cable from your TV or set-top box and connect it to the IN connector

on one of the RF splitters (included).

10. Connect one of the coaxial cables (included) to the Coax In connector on the SBM1100 and

one of the OUT connectors on the RF splitter (included).
Note

: You can use either OUT connector on the RF splitter (included) for this installation.

11. Connect the second coaxial cable (included) to the coaxial connector on the TV or set-top box

and the other OUT connector on the RF splitter (included).

12. Connect one of the Ethernet cables (included) to the Ethernet port on the SBM1100 and the

Ethernet/network port on your Smart TV or other Smart device.

13. Connect one of the power adapters (included) to the Power port on the SBM1100 and plug it

into an electrical wall outlet.
ο The Coax LEDs on both MoCA adapters should turn ON within five minutes to indicate

that a secure coaxial connection was established between the two adapters.

ο If the Coax LED does not turn ON within five minutes, disconnect and then reconnect

the power adapters on the SBM1100 and SBM1400. If the Coax LEDs still fail to turn

ON, see

Troubleshooting Solutions

for more information.

14. Power ON your Smart TV, set-top box, laptop, and any other Ethernet-connected devices.
You can now configure your Smart TV and other Ethernet-enabled devices for Internet access
through their related user interfaces.
See

Configure_MoCA_Adapters

for more information on setting up the MoCA adapters.

Advertising