5 access and execution of a test using cli – Artesyn ViewCheck on ATCA-7470/7475 Installation and Use (May 2014) User Manual
Page 33
Installation of ViewCheck
ViewCheck on ATCA-7470/7475 Installation and Use (6806800S49C)
33
3. Generate the Activation record to start using the ViewCheck application. For more
information, see
Obtaining the Activation Record
.
4. After the activation record is placed, restart the ViewCheck application using the
following script:
/opt/diagnostics/etc/init.d/diagcore restart
5. The license generated can be exported to TFTP server to avoid copying of activation
records into the blade for every reboot of OOSD image. To export license, run
/etc/rc.d/init.d/exportLicense.sh
/etc/rc.d/init.d/exportLicense.sh
Please enter the TFTP server to store the license
files[xxx.xxx.xxx.xxx]: 192.168.21.1
Please enter username: root
Please enter password:
Exporting licenses.....
License files transfer completed. For details check
/var/log/exportLicense.log log file.
4.5
Access and Execution of a Test Using CLI
You can access ViewCheck CLI using the following procedure:
1. Establish the secure shell using SSH or Putty.
2. Start the Telnet connection from an already established secure shell.
telnet localhost 11001
Trying ::1...
telnet: connect to address ::1: Connection refused
The TFTP server IP mentioned while exporting the license should be same from where
OOSD image will be loaded.