13 show-rate, Table 5-26, Set-rate – Artesyn ViewCheck on ATCA-7470/7475 Installation and Use (May 2014) User Manual
Page 82: Commands execution
Commands Execution
ViewCheck on ATCA-7470/7475 Installation and Use (6806800S49C)
82
<Name>deviceInstance</Name>
<Value>Dev Instance</Value>
</Argument>
<Argument>
<Name>monitorId</Name>
<Value>Monitor ID</Value>
</Argument>
<Argument>
<Name>rate</Name>
<Value>Rate</Value>
</Argument>
</InvokeMethod>
</Script>]]>]]>
The following table provides the set-rate command arguments.
5.4.13 show-rate
show-rate
command shows the rate of change value of network monitors.
Syntax for CLI
show-rate monitorId <Monitor Id> deviceInstance <Dev Instance>
Syntax for XML
<Script>
<InvokeMethod>
<Object>
<Class>deviceCategory</Class>
Table 5-26 set-rate
Argument
Data Type
Description
Monitor ID
Integer
Type the unique ID of the Monitor for which rate of
change value is to be set
Dev Instance
Enum
Use list-device-instances CLI command to get the
equivalent enumerated value of supported Device
Instance
Rate
Integer
Rate of change value