Installation of viewcheck – Artesyn ViewCheck on ATCA-7470/7475 Installation and Use (May 2014) User Manual
Page 43
Installation of ViewCheck
ViewCheck on ATCA-7470/7475 Installation and Use (6806800S49C)
43
<MethodDesc>
<Name>reload</Name>
<Id>20</Id>
<Description>User can issue this command when there are
updates to the User XML .</Description>
<IsStatic>false</IsStatic>
<ArgDesc>
<Name>commandStatus</Name>
<Id>0</Id>
<Description/>
<TypeDesc>
<Name/>
<Description/>
</TypeDesc>
<IsInput>false</IsInput>
<IsOutput>true</IsOutput>
<IsOptional>true</IsOptional>
</ArgDesc>
</MethodDesc>
<MethodDesc>
<Name>setLogLevel</Name>
<Id>30</Id>
<Description>Sets the Log Level of Diagnostic
Application.</Description>
<IsStatic>false</IsStatic>
<ArgDesc>
<Name>logLevelValue</Name>
<Id>0</Id>
<Description>Valid log levels (3-Critical, 2-Normal, 1-
Info)</Description>
<TypeDesc>
<Name>Integer</Name>
<Description>Integer number in range (-2^32)/2 to (2^32)/2 -
1</Description>
</TypeDesc>
<IsInput>true</IsInput>
<IsOutput>false</IsOutput>
<IsOptional>false</IsOptional>
</ArgDesc>