14 show-networkcounter-log, Table 5-27, Show-rate – Artesyn ViewCheck on ATCA-7470/7475 Installation and Use (May 2014) User Manual
Page 83: Commands execution
Commands Execution
ViewCheck on ATCA-7470/7475 Installation and Use (6806800S49C)
83
<Name>vee0-{Dev Cat}</Name>
</Object>
<Method>showRate</Method>
<Argument>
<Name>deviceInstance</Name>
<Value>Dev Instance</Value>
</Argument>
<Argument>
<Name>monitorId</Name>
<Value>Monitor ID</Value>
</Argument>
</InvokeMethod>
</Script>]]>]]>
The following table provides the show-rate command arguments.
5.4.14 show-networkcounter-log
show-networkcounter-log
command displays the list of network counters on devices
that have crossed the maximum rate value. For more information on command, rate, refer
.
Syntax for CLI
show-networkcounter-log
Syntax for XML
<Script>
<InvokeMethod>
<Object>
<Class>deviceCategory</Class>
Table 5-27 show-rate
Argument
Data Type
Description
Monitor ID
Integer
Type the unique ID of the Monitor of which rate of
change value is to be shown
Dev Instance
Enum
Use list-device-instances CLI command to get the
equivalent enumerated value of supported Device
Instance