Beisler 2111-4 - Manual (Page 18)

Short Seam Automat 2110-4 / 2111-4 Working Instructions
- B 18 -
Beisler Automated Sewing Equipment
B.2
Functions of the machine
Fig. 8
Fig. 8
Symbol bar
The symbol bar 7 indicates menus that can be reque-
sted using the function keys 6 directly from the start
menu.
All other functions of the machine can be set or chan-
ged by selecting the corresponding menus on the dif-
ferent program levels. The corresponding symbols
appear on the display of the operating panel.
B.2.5 Operating panel
Display
During the operation of the machine, the display 1
shows the values of the selected sewing program. If
menus were requested, the menu symbol or the cor-
responding parameters of the function are displayed.
Indicator panel
8 Seam symbol
9 Sewing program description (a sewing program
may consist of several seams)
a Sewing program seam number
b Seam description
c Display field for the enabled seam functions
d Bar for requestable submenus
Memory card slot 2
The memory card is the medium for storing the bak-
kup copies of all program control data. Programs can
be copied to and stored on the memory card and re-
loaded into the machine control when required.
Program stop switch
If the program stop switch 3 is pressed during the
operation of the machine, all movements and the se-
wing process are stopped.
Numeric keypad
The numeric keypad 4 is used to enter all changable
number values.
By pressing the M key, you can request the desired se-
wing programs.
By pressing the P key, you can request submenus, con-
firm inputs and exit the programming mode.
Arrow keys
By pressing the UP or DOWN arrow key 5, you can
move the cursor in the selected menu one line up or
down.
By pressing the RIGHT or LEFT arrow key, you can
mark the desired parameter in the selected menu using
the cursor or browse forward or backward if the para-
meter list consists of several pages.
Function keys
You can use the function keys 6 to request the me-
nus for setting or changing machine functions on the
selected level.