Beisler 2111-4 - Manual (Page 21)

- B 21 -
Short Seam Automat 2110-4 / 2111-4 Working Instructions Beisler Automated Sewing Equipment
Fig. 10/11
Fig. 10
Fig. 11
B.3
Operation
B.3.3 Selecting the sewing program
After the machine has been turned on and the control pro-
gram has been activated, the sewing program that had
been selected last is set.
Sewing programs 1 are stored in the memory (M). The
program control memory can store up to 50 sewing pro-
grams (M 01-M 50).
Fig. 10: For each sewing program, up to six seam
numbers 2 (01, 02, 03, 04, 05, 06) can be assigned.
The program control of the machine is equipped at the
factory with a standard program:
•
Sewing program M 01 with six different seams for au-
tomatic crimping over of pocket edges and the tuck-
ing of pocket edges to pocket bags.
1. Select sewing program at operating panel.
Request memory:
• Press  key.
Select sewing program number, e.g. 01:
• Press  and
keys.
The selected program is activated immediately.
2. Select seam number of desired seam.
Move cursor to seam number:
• Press 0 or / key.
Confirm selection:
• Press
% key.
Fig. 11: Display during seam number selection:
1 Active seam number
2 Passive seam number
3 Seam number is selected