Beisler 2111-4 - Manual (Page 76)

Short Seam Automat 2110-4 / 2111-4 Workinging Instructions
- D 76 -
Beisler Automated Sewing Equipment
D.3
Programming
D.3.4 Global parameters
Global parameters are values that control the basic func-
tions of the machine. If global parameters are changed,
this change affects all stored sewing programs.
&'(6 )@7

Requesting / exiting the global parameter menu:
The minimum and maximum input values are limited by
the program control unit. Values that are not within the limits
will not be accepted but reduced to the corresponding
minimum or maximum value.
Change from start level to level 1:
• Press
 key.
Request global parameter menu:
• Press
' key.
Browse through list:
• Press
0 or / key.
Move to line in list:
• Press
# or $ key.
Change parameters:
• Press
% key.
• Insert new value using numeric keypad or
• Press
0 or / key.
Confirm input:
• Press
% key.
Exit menu:
• Press  key.