Safety instructions – Beisler 2111-4 User Manual
Page 5
- A 5 -
Short Seam Automat 2110-4 / 2111-4 Working Instructions
Beisler Automated Sewing Equipment
A.1
Safety instructions
Important information for the operator!
This machine has been manufactured in keeping with the latest technological develop-
ments and is operationally safe. However, it may present potential hazards, particu-
larly if it is operated by inadequately trained personnel or if it is not used correctly:
•
For personnel operating and handling the machine, the operator must prepare written
instructions in a reasonable form and in the language of the operating personnel
based on these working instructions (Germany: Accident Prevention Regulations UVV
VBG 1 § 7.2).
•
Use the operating instructions to familiarize the operating personnel with the func-
tions, operation, and care of the machine and check to see if the operating per-
sonnel fully understands these instructions.
•
Use the service instructions to familiarize the service personnel with the setting
up and maintenance of the machine.
•
For any modifications of the machine that have not been approved by Beisler GmbH
in writing, the operator is fully responsible.
•
The contents of the working instructions are subject to change without further notice.
•
Concerning translations into foreign languages, the German version of these working
instructions is binding.
•
Should you encounter problems that are not mentioned in these working instruc-
tions, please contact your supplier immediately for your own safety. Please do not
hesitate to contact Beisler if you have any suggestions that help to improve this
product.
•
Keep these working instructions close to the machine so that safety instruc-
tions and information on operation, setting-up, and maintenance are always
accessible.
Warranty
Beisler GmbH warrants the safety, operatability, and repair without charge of the short
seam automat 2110-4 / 2111-4 for a period of 6 months under the condition that:
•
the machine is used exclusively for the intended purpose and serviced in accor-
dance with the information in these working instructions,
•
modifications of the machine are carried out only with prior written approval of Beisler
GmbH,
•
only original spare parts or accessories approved by Beisler GmbH are used. For
a complete list of all approved spare parts, please contact Beisler GmbH.
If the machine is used for more than 10 hours per day (shift operation), the warranty
period is reduced to 3 months.
The warranty period starts with the delivery of the machine to the operator.