BSS Audio FDS-388 OMNIDRIVE Owner's Manual - Manual (Page 11)

11
Rear panel
A Mains power input
B Fuse
C Power voltage selector
D Meteorology probe connector
Refer to Section 20.0 Meteorology and Section 8.0 Delay Utils Screen.
E 8 Band outputs
The FDS-388 audio outputs are electronically balanced and floating.
Transformer balancing is available as a retrofit option.
Pin 1 Shield/Ground
Pin2 Signal Hot (+)
Pin3 SignalCold (-)
F 2 Channel inputs
The FDS-388 audio inputs are electronically balanced. Transformer balancing
is available as a retrofit option.
Pin 1 Open circuit
Pin2 Signal Hot (+)
Pin3 SignalCold (-)
G +10dB switch
With this switch in, 10dB of gain is added to the input signal. An led on the
front panel indicates when this switch is on.
H Mains power switch
J Midi interface connectors
K Option panel
For future interface options.
2.7 Rear panel