BSS Audio FDS-388 OMNIDRIVE Owner's Manual - Manual (Page 36)

36
XOver More Screen
13.0 XOver More Screen
Quick Reference
1 To change a band name, press the top soft key, press the
parameter wheel to select a band and turn the param-
eter wheel to adjust.
2 To adjust an individual edge slope, press the middle soft
key, press the parameter wheel to select a band and turn
the parameter wheel to adjust the slope.
3 To adjust a band edge frequency, press the bottom soft
key, press the parameter wheel to select an edge to
adjust and turn the parameter wheel to move it.
The XOver More Screen gives the user access to the low level adjustment of
individual edge slopes and frequencies. It also contains the selection of names
for each band.
To the left of the top line are the band name of the currently selected band and
the band letter and whether the edge being edited is high or low.
The centre of the top line contains the current program number, a letter
denoting which backup/swap memory is being used and an asterisk indicating
when the program has been edited. To the right of the top line are the current
program OEM name and program name.
Program number
Swap status
Edited flag
OEM name
Program name Current band name
Current edge
Band edge frequency
Band edge low slope
Band edge high slope Band edges