Transmit fec type, Transmit coding rate, Transmit fec type -64 transmit coding rate -64 – Comtech EF Data CDM-570/570L Vipersat User Manual
Page 100: Figure 3-83 transmit data rate prompt, Figure 3-84 transmit fec type prompt, Figure 3-85 transmit coding rate prompt, Figure 3-83 to
Vipersat Configuration
3-64
Vipersat CDM-570/570L User Guide
Figure 3-83 Transmit Data Rate prompt
Note that the valid range for this parameter will vary depending on the Modula-
tion Type, Coding Rate, and FAST feature Data Rate.
Transmit FEC Type
Enter C at the command prompt to use the dialog shown in Figure 3-84 to enter
the FEC Coding Type for the CDM-570/570L’s Home State. Turbo must be
selected when operating in Vipersat mode.
Figure 3-84 Transmit FEC Type prompt
Transmit Coding Rate
Enter D at the command prompt to use the dialog shown in figure 3-85 to set the
Transmit Coding Rate for the target CDM-570/570L’s Home State.
Note that Coding Rates 3 (1/2), 4 (2/3), and 8 (1/1) are not valid selections when
operating in Vipersat mode with Turbo Product Coding.
Figure 3-85 Transmit Coding Rate prompt