Comtech EF Data CDM-570/570L Vipersat - Manual (Page 146)

Entry Channel Mode Switching
B-28 Vipersat CDM-570/570L User Guide
Note: Refer to the Vipersat SLM-5650A modem manual for Entry Channel
configuration setup. The text referenced within is similar between the
CDM-570/L and the SLM-5650A; the UI page appearances may differ,
however.
Figure B-15 STDMA Page with Entry Channel Mode, CDM-570/570L
Switching an ECM Remote from SCPC to STDMA
Use the following procedure to switch an ECM Remote operating in SCPC
mode back to STDMA mode.
Note: This switch must be performed manually.
1. Click the Remote List menu item on the STDMA page shown in
figure B-15 above to display the STDMA Remote List shown in
figure B-16.
NOTE
NOTE