Turbo product coding, Header compression, Payload compression – Comtech EF Data CDM-570/570L Vipersat User Manual

Page 22: Quality of service, Data encryption

Advertising
background image

Product Description

1-6

Vipersat CDM-570/570L User Guide

Turbo Product Coding

The Comtech Vipersat CDM-570/570L incorporates a Turbo Product Codec

(TPC). TPC is an FEC technique that delivers significant performance improve-

ment when compared to Viterbi with concatenated Reed-Solomon. TPC simul-

taneously offers increased coding gain, lower decoding delay, and significant

bandwidth savings.

Header Compression

Configurable on a per route basis, Header Compression reduces the required

Voice over Internet Protocol (VoIP) bandwidth by as much as 60%. Example: a

G.729 voice codec operating at 8 kbps will occupy 32 kbps once encapsulated

into IP framing on a LAN. Using IP/UDP/RTP Header Compression, the same

traffic only needs 10.8 kbps total WAN satellite bandwidth to cross the link.

Normal Web/HTTP traffic can be reduced by an additional 10% via IP/TCP

Header Compression.

Payload Compression

Compressing Payload condenses the size of data frames and reduces the satellite

bandwidth required to transmit across the link. Configurable on a per route

basis, Payload Compression optimizes traffic and reduces bandwidth up to 40%.

Quality of Service

The CDM-570/570L supports multi-level QoS that minimizes jitter and latency

for real time traffic, provides priority treatment to mission critical applications,

and allows non-critical traffic to use the remaining bandwidth. Three modes are

available: Max/Priority, Min/Max, and Diff Serv.

Data Encryption

The CDM-570/570L provides 3xDES data encryption to prevent unauthorized

access to data over the satellite link. Encryption is configurable on a per route

basis

Advertising