Receive data rate, Receive fec type, Receive data rate -66 receive fec type -66 – Comtech EF Data CDM-570/570L Vipersat User Manual
Page 102: Figure 3-88 receive frequency prompt, Figure 3-89 receive data rate prompt, Figure 3-90 receive fec type prompt
Vipersat Configuration
3-66
Vipersat CDM-570/570L User Guide
Figure 3-88 Receive Frequency prompt
Note that this screen dialog example displays the frequency range for the CDM-
570L L-Band modem. For the CDM-570, the range displayed will be either 50
to 90 MHz or 100 to 180 MHz.
Receive Data Rate
Enter N at the command prompt to use the dialog shown in Figure 3-89 to set
the Receive Data Rate for the target CDM-570/570L’s Home State.
Figure 3-89 Receive Data Rate prompt
Note that the valid range for this parameter will vary depending on the Modula-
tion Type, Coding Rate, and FAST feature Data Rate.
Receive FEC Type
Enter O at the command prompt to use the dialog shown in figure 3-90 to set the
Receive FEC Type for the target CDM-570/570L’s Home State. Turbo must
be selected when operating in Vipersat mode.
Figure 3-90 Receive FEC Type prompt