Comtech EF Data CDM-570/570L Vipersat - Manual (Page 73)

Chapter 3 - Using the Command Line Interface (CLI) 3-37
Vipersat Configuration
The QoS mode that is chosen will determine the settable parameters for defining
QoS rules.
Enter Q at the command prompt in figure 3-42 to access the QoS Rules Config-
uration screen. The example shown in figure 3-44 is for Max/Priority mode.
Figure 3-44 QoS Rules Configuration screen, Max/Priority Mode
Enter D at the prompt in figure 3-42 to access the DiffServ Rules Configura-
tion screen.
Figure 3-45 DiffServ Rules Configuration screen