Comtech EF Data CDM-570/570L Vipersat - Manual (Page 28)

Initial Configuration
2-4 Vipersat CDM-570/570L User Guide
Use the following procedure to configure a CDM-570/570L to the network role
it is to fill in a Vipersat network.
1. From the Main Menu shown in figure 2-1, select the Administration
command by entering A at the command prompt.
Figure 2-1 Main Menu screen
2. From the Administration screen shown in figure 2-2, select the Features
Configuration command by entering F at the command prompt.
Figure 2-2 Administration screen