ConnectGear GP-10P - Manual (Page 18)

User's Manual
2. Client Installation and Configuration (refer to section 3 for more
detailed information).
Client users must install Windows PTPP driver (Peer-to-Peer
Printing) for network printing.
I n a d d i t i o n , a f t e r P T P P i s i n s t a l l e d , t h e s y s t e m w i l l
automatically search for all print servers on the network, and add
all printing ports (P1/P2/P3) of the print servers into Windows’
printing port (refer to Network Printing Architecture in section 1.4
for more detailed information).
3.2 Administrator Installation and Setup
T h e A d m i n i s t r a t o r I n s t a l l a t i o n c a n b e p e r f o r m e d o n W i n d o w s
95/98/Me/NT/2000 with the same user interface. Before the installation,
please verify that your network protocol is installed on your PC (TCP/IP,
IPX and/or NetBEUI). It will be helpful in your installation process.
1. Insert the CD shipped along with the print server into your CD-ROM
drive. The Autorun.exe program should be executed automatically by
Windows. If not, run Autorun.exe manually from CD-ROM drive’s
root directory.
2. The "Installation Manager" will be displayed on the screen as following.