ConnectGear GP-10P User Manual
Page 55
User's Manual
4.
Enter the print server name in the Print server field.
5.
Assign printer and print queue names.
6.
Set the Banner type to PostScript if you are using a PostScript
printer, and to Text otherwise.
7.
Set the Location to Manual Load.
8.
Press F10 to save the new configuration and return to the main
menu.
9.
Choose Printers menu.
10.
Select your newly created Printer from the Printers list.
11.
You can view or edit the Printer number from 0 to 255.
12.
Save the new configuration and exit PCONSOLE.
You must load NetWare print server on the NetWare file server so
that the PrintSir configured as a remote printer can connect to that print
server and service the print jobs. To load the NetWare print server, type
“LOAD PSERVER.NLM PrintServer” command at the system console of
the NetWare file server, where PrintServer is the print server name newly
created by the PCONSOLE program.
To configure the PrintSir as a NetWare remote printer, perform the