ConnectGear GP-10P - Manual (Page 69)

User's Manual
7.9 PrintSir Cfg - PrintSir Network Ability Setting
The PrintSir Cfg page allows you to set:
z The Diagnostic Printout, which determines whether or not a
diagnostic printout should be printed on the printer to which the
PrintSir is connected.
z The TCP/IP Support, which determines whether or not TCP/IP
network printing is supported
z The NetWare Support, which determines whether or not NetWare
network printing is supported
z The NetBEUI Support, which determines whether or not NetBEUI
network printing is supported
z The Write button: save the configuration to the PrintSir.
z The Reset button: reset the PrintSir to let the changes take effect.
7.10 Restore Default - Restore to Default