ConnectGear GP-10P User Manual
Page 81
User's Manual
z
Alias name, an alternate name by which the PrintSir can be
called (in addition to the PSxxxxxx name printed on the
label).
z
NetWare Protocol Support, which determines whether or not
the PrintSir support NetWare printing function.
z
NetBEUI Protocol Support, which determines whether or not
the PrintSir support NetBEUI network protocol.
z
POST diagnostic printout, which determines whether or not a
diagnostic printout should be printed to the attached printer.
z
S a v e t o P r i n t S i r b u t t o n : s a v e t h e c o n f i g u r a t i o n t o t h e
PrintSir.
z
Type new password, change to new password.
z
Re-type new password, confirm the new password.
z
Change password button : save the new password to the
PrintSir.
The PrintSir will verify your password (it will ignore the User
Name item) when you save the configuration.
M a k e s u r e t o r e s e t t h e P r i n t S i r (described in section 8.3.11
System Utilities ) to let the changes take effect.
8.3.7
Setting IP Address
The IP Cfg page allows you to configure the IP address where the