ConnectGear GP-10P User Manual
Page 45
Advertising
User's Manual
The print server name can be identical to the PSxxxxxx name
printed on the label of the PrintSir, or you can use an alias
name you have assigned using PSETUP.
17.
Press Enter to select the newly created print server.
18.
Select Print Server Configuration.
19.
Select Printer Configuration.
20.
Select Printer 0 (or Printer 1, Printer 2), and press Enter, then
select Parallel LPT1 (or LPT2, LPT3) in the Type field. If
y o u r P r i n t S i r i s w i t h o n l y o n e p o r t , y o u d o n o t n e e d t o
configure this Type field.
21.
Press Escape, and answer Yes to the Save Changes question.
22.
Select Queues Serviced by Printer, then select Printer 0 (or
Printer 1, Printer 2) and press Enter.
Advertising