ConnectGear GP-10P - Manual (Page 41)

User's Manual
To use this method,
1. Log into your NetWare server as SUPERVISOR.
2. Insert the CD-ROM included with the PrintSir, and change to
the appropriate drive and directory. Ex. e:\dosutil\
3. Run the INSTALL program
4. Select your new PrintSir from the displayed list and press
Enter. The name listed will be the same as the Device Name
printed on a label on your PrintSir.
5. A list of defaults will be displayed. If you need to change any
of these items, use the arrow keys to choose the item you need
to change, then press Enter to display a list of choices. When
all of the values are correct, select the Continue Installation
item and press Enter.