Dhcp cfg - dhcp server configure – ConnectGear GP-10P User Manual
Page 71
User's Manual
an upgrade,
z
Make sure the updated PSxxROM.BIN (depending on your model)
file is stored in your computer or CD-ROM.
z
Choose the updated firmware in File Name field. For example,
<CD Driver>\FLASHROM\<Model Name>\PSxxROM.BIN
z
Choose the suitable Feature Set (“Standard Feature Set - Type 1”
or “NetWare Enhancement Feature Set – Type 2” ) and then click
Upgrade button to upgrade the PrintSir’s flash memory. The
yellow Status LED on the PrintSir should be lit continuously.
7.12
DHCP Cfg - DHCP Server Configure
The PrintSir can be configured as DHCP server to provide dynamic IP
addresses assignment. The DHCP Cfg page allows you to set:
z
The DHCP startup, which determine if the PrintSir will act as
DHCP server. If this item is set to Auto, the PrintSir will detect if
there is any DHCP server on the network when it boots up. If there
is no DHCP server on the network, then the PrintSir will configure
itself as DHCP server; otherwise it will disable this function.
z
DHCP setup is used to configure TCP/IP parameters that will be
assigned to a DHCP client. If this item is set to Auto, the PrintSir
will determine all TCP/IP parameters automatically; otherwise you
will configure the following parameters: