ConnectGear GP-10P - Manual (Page 36)

User's Manual
Step1.
If this is your first time installing PrintSir print server, please
install the administrator software on Windows NT/2000 server first.
Refer to section 3.2 for installation instructions.
If your network has already installed a working PrintSir print
server and your Windows NT/2000 server has not yet installed PrintSir
PTPP driver, please install the client software. Refer to section 3.4 and
3.5 for installation instructions.
Step2.
Please add/configure the Peer-to-Peer Printing of the Windows
NT/2000 network printer and verify that you can print from Windows
NT/2000 to the PrintSir by the installed PTPP driver.
Step3.
Share the above server’s printer to the network by performing the
standard Windows printer sharing process.
4.3 User Installation and Setup
Windows NT Server
Windows 98
Windows 2000
* TCP/IP
* IPX
* NetBEUI
TCP/IP
IPX
TCP/IP
PTPP
Print
Queue
Windows NT Server
Windows 98
* TCP/IP
* IPX
* NetBEUI
TCP/IP NetBEUI
PTPP
Print Queue