Microcom 322M - Manual (Page 103)

322M Operator’s Manual
99
Appendix C: Quick Reference Command Summary
The following is a list of the header element mnemonics and their default values:
HFM, LSX, LSY, WEB, GAP, DPS, LCB, AGD, SPG, OFX, OFY
0, 832, 614, 13, 24, 35, 0, 1, 285, 0, 0
The following is a list of the format field element mnemonics and their default values:
TSN, XB, YB, CC, TCI, CGN, FO, FJ, CMX, CMY, CS, TSP, , , AN
1, 0, 0, *, 1, **, 0, 0, 1, 1, *, 1, , , 0
* The default value depends on the character generator (CGN) used.
** The default value depends on the text conversion identifier (TCI) used.
The following is a list of the Line Draw field mnemonics and their default values:
TSN, XB, YB, , TCI, , , , XS, YS, , , , , AN
1, 1, 1, , 6, , , , 1, 1, , , , , 0
The following is the list of commands in numeric order:
^A
^D COMMAND
2 Text String Entry Mode: Precedes the text strings that are supplied to the
various fields in the format (Equivalent to ^B).
3 Print Command: Prints a single label or starts the printing of a batch of labels
(Equivalent to ^C).
5 Send Printer Status: (Equivalent to ^E).
11 Print Test Pattern: (Equivalent to ^K).
12 Print Blank Label: (Equivalent to ^L).
20 Bits Per Second: This command changes the serial port communication
speed or Baud rate. Speeds over 38400 bps will cause the printer to utilize
flow control during the print routine.
2 300 bps
3 600 bps
4 1200 bps
5 2400 bps
6 4800 bps
7 9600 bps
8 19200 bps
9 38400 bps
10 57600 bps
11 115200 bps