Microcom 322M - Manual (Page 107)

Appendix C Quick Reference Command Summary
322M Operator’s Manual
103
^A ^D COMMAND
XX 51 Load Y Direction Offset (OFY): The ^Axx specifies the value.
XX
54 Send Saved Format File to Serial Port: The ^Axx specifies the slot number
where the format file is stored (1-128).
XX
55 Select Default Power-up Format: Selects the ROM power-up format. The
^Axx selects from the available formats 1 through 8.
56 Select User Defined Layout: Signals the end of the label field definition.
57 Enter Label Format Mode: Instructs the printer that information for a format
is following the command.
XX
58 Process Saved Format: The ^Axx selects which stored format to process (1-
128).
XX
59 Save Format File: The ^Axx specifies the memory location or slot to save the
format following the command.
60 Clears Command 61
XX
61 Mark Text Starting Position: The ^Axx designates which text field to start
entering new data.
62 Pre-Padded Text: This command is sent after the text that is to appear at the
beginning of each field.
X
63 Text Mode Control: Allows the entry of new text without the ^D2 command
and/or clears all previous text when new text is added.
0 Disable 1 and 2
1 Enable Auto-Print Mode
2 Clear all previous text upon receiving new data.
3 Enable 1 and 2
XX
64 Auto-Print String Count: The ^Axx instructs the printer how many text strings
to accept before printing.
XX
66 Clear Single Stored Format File: The ^Axx specifies which memory slot to
clear (1-128). This command only functions with format files and not will
downloadable fonts and/or graphics.
70 Clear Commands 73 through 76
71 Load MaxiCode Bar Code Data
XX
73 Load Copies Count: Instructs the printer to print a group of labels. This
command will not increment/decrement serial numbers.