Microcom 322M - Manual (Page 4)

Proprietary Statement
This manual contains information proprietary to Microcom Corporation. This information is
intended solely for the use of parties operating and maintaining such equipment described
herein.
Product Enhancements
Microcom Corporation is committed to the continual improvement of performance and
quality in our products. For this reason, specifications are subject to change without notice.
Liability Disclaimer
Microcom Corporation makes every effort to assure that all information and specifications
contained in this manual are accurate; however, mistakes are sometimes made. Microcom
Corporation shall not be liable for any damages resulting in the use or misuse of this
product. The exclusion or limitation involving consequential or incidental damage does not
apply to all states; therefore limitation mentioned above may or may not apply.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the instructions contained in this
manual, may cause harmful interference to radio communications.
HyperTerminal
® and HyperAccess ® are trademarks of Hilgraeve Inc.
Centronics ® is a registered trademark of Data Computer Corporation.
HP ® and LaserJet II ® are trademarks of Hewlett-Packard Company.
Arial ® is a registered trademark of The Monotype Corporation.
TrueType ® is a registered trademark of Apple Computer, Inc.
Microsoft ® , Windows ® , Windows NT ® are registered trademarks of Microsoft Corporation.
Instapak ® is a registered trademark of Sealed Air Corporation.
Other products and company names mentioned herein may be trademarks of their
respective owners.