ONICON System-10 BTU - Manual (Page 26)

11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax (727) 442-5699 • [email protected]
System-10 BTU Meter Manual 03/15 - 0651-16 / 18323 Page 26
SINGLE MODE OPERATION
PAGE NUMBER DISPLAY NAME SELECTABLE UNITS
1 ENERGY TOTAL BTU, TONHR or KWHR
2 FLOW TOTAL GAL, LITER, METERS 3
3 ENERGY RATE BTU/HR, TONS, KW
4
FLOW RATE
GPM, GPH, MGD, L/SEC, L/MIN,
L/HR, METERS 3 /HR
5 SUPPLY TEMPERATURE DEG F, DEG C
6 RETURN TEMPERATURE DEG F, DEG C
7* Di3 PULSE TOTAL COUNTS or TEXT ENTRY
8 ALARM STATUS NOT APPLICABLE
9 SERIAL NUMBER NOT APPLICABLE
DUAL MODE OR BI-DIRECTIONAL MODE OPERATION
PAGE NUMBER DISPLAY NAME SELECTABLE UNITS
1 MODE 1 ENERGY TOTAL BTU, TONHR or KWHR
2 MODE 1 FLOW TOTAL GAL, LITER,METERS 3
3 MODE 2 ENERGY TOTAL BTU, TONHR or KWHR
4 MODE 2 FLOW TOTAL GAL, LITER, METERS 3
5 ENERGY RATE BTU/HR, TONS, KW
6
FLOW RATE
GPM, GPH, MGD, L/SEC, L/MIN,
L/HR, METERS 3 /HR
7 SUPPLY TEMPERATURE DEG F, DEG C
8 RETURN TEMPERATURE DEG F, DEG C
9* Di3 PULSE TOTAL COUNTS or TEXT ENTRY
10 ALARM STATUS NOT APPLICABLE
11 SERIAL NUMBER NOT APPLICABLE
* Menu page only displayed when optional digital input is present.
4.3 UNITS AND MULTIPLIERS
The units and multipliers are programmed prior to delivery. Contact ONICON for assistance in
changing units or multipliers.
4.4 ANALOG OUTPUTS
The System-10 BTU Meter is capable of providing up to four analog outputs (optional). Analog
outputs are programmed at the factory in terms of units and scaling. Changing any of the
displayed units or multipliers will affect the analog outputs. If any unit or multiplier values are
changed at the System-10 BTU Meter, the analog output value(s) will also be changed. If you are
unsure of the ramifications of any changes you are contemplating, please contact ONICON for
assistance.