OpenEye E-Series Slim - Manual (Page 27)

32705AB 27
System Setup Continued
Use DST – After completing the Time Zone setup, click the USE DST value ( ON or OFF ) to
enable or disable Daylight Saving Time.
NTP Type
– Click
NTP TYPE to enable or disable a Network Time Protocol. In the NTP Type
window, enable NTP SERVER , and then type your desired NTP Server URL . Click SYNC
NOW , and then click OK .
Keypad Beep - Enables or disables audible keypad touch confirmation. ( ON / OFF )
Auto Log Off – This feature will close the Setup Menu after a predetermined period of
inactivity.( 1 ~ 10 min, OFF ).
S/W Upgrade – Start firmware upgrade from USB media.
Upgrade Firmware
1. Click MENU on the hover menu and select SETUP .
2. Click SYSTEM , and then click SYSTEM SETUP .
3. Click S/W UPGRADE to open the UPGRADE FIRMWARE window.
4. Connect your storage device to the USB port.
5. Click SCAN .
6. Click OK to start the upgrade.