OpenEye E-Series Slim User Manual
Page 5
32705AB
5
adjustment of other controls may result in damage and will often require extensive
work by a qualified technician to restore the unit to its normal operation
If the unit has been dropped or the enclosure has been damaged.
When the unit exhibits a distinct change in performance - this indicates a need for
service.
18.
Servicing
– Do not attempt to service this product unless instructed to by an OpenEye
engineer. Opening or removing covers may expose the user to dangerous voltage or
other hazards. Refer all servicing to qualified personnel.
19.
Replacement Parts
– When replacement parts are required, be sure the service
technician has used replacement parts specified by OpenEye or have the same
characteristics as the original part. Unauthorized substitutions may result in fire, electric
shock or other hazards.
20.
Safety Check
– Upon completion of any service or repairs to this unit, ask the service
technician to perform safety checks to determine that the unit is in proper operating
condition.
NOTES ON HANDLING
Please retain the original shipping carton and/or packing materials supplied with this product.
To ensure the integrity of this product when shipping or moving, repackage the unit as it was
originally received from OpenEye.
Do not use volatile liquids, such as aerosol spray, near this product. Do not leave rubber or
plastic objects in contact with this product for long periods of time. They will leave marks on
the finish.
The top and rear panels of the unit may become warm after long periods of use. This is not a
malfunction.
NOTES ON LOCATING
Place the unit on a level surface. Do not use it on a shaky or unstable surface such as a
wobbling table or inclined stand.
If this unit is placed next to a TV, radio, or VCR, the playback picture may become poor and
the sound may be distorted. If this happens, place the recorder away from the TV, radio, or
VCR.
NOTES ON CLEANING
Use a soft dry cloth for cleaning.
For stubborn dirt, soak the cloth in a weak detergent solution, wring well and wipe. Use a dry
cloth to wipe it dry. Do not use any type of solvent, such as thinner and benzene, as they may
damage the surface of the recorder.
If using a chemical saturated cloth to clean the unit, follow that product’s instructions.